Limitcheck error
If you get a PostScript error "limitcheck" offending command "image",
an image in your document is too large, its resolution is too high or
it cannot be rotated. Reduce the size or resolution, rotate the image
at a different angle or rotate it in an application like Photoshop.
Some older level 2 versions of PostScript RIPs as well as Acrobat Distiller
4.0 (and 4.05 and probably 3.x) cannot handle copydot files in which the
number of pixels exceeds 32000 in either direction. Using such big copydot
files (eg larger than about 33 centimeters for a 2400 dpi copydot) can
lead to a PostScript error "limitcheck" offending command "image".
If you get a PostScript error "limitcheck" offending command "image"
when printing from INdesign 1.0, the document probably contains a multitone
EPS (duotone, tritone,.. ) that uses a spot color. To get around the error,
you can either perform the colour separation in INdesign itself (deselect
"In-RIP" in the separations tab) or you should upgrade your
RIP to Adobe PostScript version 3011 or later.
IOerror error
An "ioerror", offending command "image" or "colorimage"
points to an incorrect amount of data in an image or it
indicates that the printer's PS interpreter reads beyond the
end of the job while rendering an image. Two possible
solutions:
- Make sure that the channel used to connect the
printer to your system is truly binary or try to change
you printer driver's settings from binary to ASCII. In
general, parallel (Centronics) interfaces do not support
binary datatransfer, serial and network interfaces do.
- Scan, edit or import the image again.
Typecheck or rangecheck error
If the PostScript error is "typecheck" or "rangecheck",
you probably tried printing a PostScript level 2 file to a
PostScript level 1 device. Check your driversettings. | 
